CPLBW Automatic Linear Bottle Washing Machine is used for washing of bottles. Bottles will be pushed from in feed tray and then move on wire woven conveyor belt, which align the Bottle in correct position, to enter in to the carrier pocket with help of oscillating guide rails. Oscillating arm deliver the Bottle inside pocket in mouth down position over spraying nozzles. Multi jet sprayers fixed at the top cause the total external and internal surface to be washed. To avoid any possible cross contamination between two different waters. Each washing station is provided with an independent circuit. Carrier pocket is moving with indexing motion. When the baskets have completed their motion the needles are lifted. They penetrate the bottle, spraying jets of water or compressed air then return down. The baskets movement then advances by one station. Each station of bottle passes through the washing cycles selected.

   

 

Special Pocket system ensures easy and trouble free washing of bottles from outer and inner side.

Indexing motion makes easier for Multi jet Nozzles / syringes to move inside bottle, when it is in stationery motion.

Washing cycles can be adjusted as per customer requirement.

User friendly machine, even semi skilled operator can operate the machine very easily.

Low RPM but High out put.

Imported pumps are provided in the machine, which gives a good pressure to wash bottles properly.

Imported Gear Motor for Main drive and conveyor.

A.C. Frequency drive for Main drive and conveyor.

Pumps with tank (60 liters each) 3 nos.

In feed conveyor belt system.